Datasheet

V850ES/JG3 CHAPTER 29 ELECTRICAL SPECIFICATIONS
R01UH0015EJ0300 Rev.3.00 Page 775 of 870
Sep 30, 2010
Data Retention Characteristics
In STOP mode
(T
A = −40 to +85°C, VDD = EVDD = AVREF0 = AVREF1, VSS = EVSS = AVSS = 0 V)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Data retention voltage VDDDR STOP mode (all functions stopped) 1.9 3.6 V
Data retention current IDDDR
STOP mode (all functions
stopped), V
DDDR = 2.0 V
8 80
μ A
Supply voltage rise time tRVD 200 μ s
Supply voltage fall time tFVD 200 μ s
Supply voltage retention time tHVD After STOP mode setting 0 ms
STOP release signal input time tDREL After VDD reaches 2.85 V (MIN.) 0 ms
Data retention input voltage, high VIHDR VDD = EVDD = VDDDR 0.9VDDDR VDDDR V
Data retention input voltage, low VILDR VDD = EVDD = VDDDR 0 0.1VDDDR V
Caution Shifting to STOP mode and restoring from STOP mode must be performed within the rated operating
range.
t DREL t HVD
t FVD t RVD
STOP release signal inputSTOP mode setting
V
DDDR
V IHDR
V IHDR
V ILDR
V DD /EV DD
RESET (input)
STOP mode release
interrupt (NMI, etc.)
(Released by falling edge)
STOP mode release
interrupt (NMI, etc.)
(Released by rising edge)
Operating voltage lower limit