Datasheet

V850ES/JG3 CHAPTER 29 ELECTRICAL SPECIFICATIONS
R01UH0015EJ0300 Rev.3.00 Page 769 of 870
Sep 30, 2010
(i) KYOCERA KINSEKI CORPORATION: Crystal resonator (TA = −10 to +70°C)
Recommended Circuit Constant
Oscillation Voltage
Range
Type Circuit Example Part Number
Oscillation
Frequency
f
X (kHz)
C1 (pF) C2 (pF) Rd (Ω) MIN. (V) MAX. (V)
CX49GFWB04000D0PESZZ 4.000 8 8 0 2.2 3.6
CX49GFWB05000D0PESZZ 5.000 8 8 0 2.2 3.6
CX49GFWB06000D0PESZZ 6.000 8 8 0 2.2 3.6
CX49GFWB08000D0PESZZ 8.000 8 8 0 2.2 3.6
Surface
mounting
X2X1
C1
C2
Rd
CX49GFWB10000D0PESZZ 10.000 8 8 0 2.2 3.6
Caution This oscillator constant is a reference value based on evaluation under a specific environment by the
resonator manufacturer.
If optimization of oscillator characteristics is necessary in the actual application, apply to the
resonator manufacturer for evaluation on the implementation circuit.
The oscillation voltage and oscillation frequency indicate only oscillator characteristics. Use the
V850ES/JG3 so that the internal operating conditions are within the specifications of the DC and AC
characteristics.
(ii) Murata Mfg. Co. Ltd.: Ceramic resonator (T
A = −20 to +80°C)
Recommended Circuit Constant
Oscillation Voltage
Range
Type Circuit Example Part Number
Oscillation
Frequency
f
X (kHz)
C1 (pF) C2 (pF) Rd (Ω) MIN. (V) MAX. (V)
CSTCC2M50G56-R0 2.500 (47) (47) 3300 2.85 3.6
CSTCR4M00G55-R0 4.000 (39) (39) 1500 2.85 3.6
CSTCR5M00G53-R0 5.000 (15) (15) 1500 2.85 3.6
CSTCR6M00G53-R0 6.000 (15) (15) 1500 2.85 3.6
CSTCE8M00G55-R0 8.000 (33) (33) 330 2.85 3.6
Surface
mounting
CSTCE10M0G52-R0 10.000 (10) (10) 470 2.85 3.6
CSTLS4M00G56-B0 4.000 (47) (47) 1500 2.85 3.6
CSTLS5M00G53-B0 5.000 (15) (15) 1500 2.85 3.6
CSTLS6M00G53-B0 6.000 (15) (15) 1500 2.85 3.6
CSTLS8M00G53-B0 8.000 (15) (15) 680 2.85 3.6
Lead
XT2XT1
C1
C2
Rd
CSTLS10M0G53-B0 10.000 (15) (15) 680 2.85 3.6
Caution This oscillator constant is a reference value based on evaluation under a specific environment by the
resonator manufacturer.
If optimization of oscillator characteristics is necessary in the actual application, apply to the
resonator manufacturer for evaluation on the implementation circuit.
The oscillation voltage and oscillation frequency indicate only oscillator characteristics. Use the
V850ES/JG3 so that the internal operating conditions are within the specifications of the DC and AC
characteristics.
Remark Figures in parentheses in columns C1 and C2 indicate the capacitance incorporated in the resonator.