Datasheet

V850ES/JG3 CHAPTER 27 FLASH MEMORY
R01UH0015EJ0300 Rev.3.00 Page 733 of 870
Sep 30, 2010
Figure 27-6. Example of Wiring of V850ES/JG3 Flash Writing Adapter (FA-100GC-8EU-A)
(in CSIB0 + HS Mode) (2/2)
Notes 1. Wire the FLMD1 pin as shown below, or connect it to GND on board via a pull-down resistor.
2. Pins used when CSIB3 is used
3. Supply a clock by creating an oscillator on the flash writing adapter (enclosed by the broken lines).
Here is an example of the oscillator.
Example
X1 X2
4. Pins used when UARTA0 is used.
Caution Do not input a high level to the DRST pin.
Remarks 1. Process the pins not shown in accordance with processing of unused pins (see 2.3 Pin I/O
Circuit Types, I/O Buffer Power Supplies and Handling of Unused Pins).
2. This adapter is for the 100-pin plastic LQFP package.