Datasheet

V850ES/JG3 CHAPTRER 8 16-BIT TIMER/EVENT COUNTER Q (TMQ)
R01UH0015EJ0300 Rev.3.00 Page 371 of 870
Sep 30, 2010
Figure 8-36. Register Setting in Pulse Width Measurement Mode (2/2)
(e) TMQ0 counter read buffer register (TQ0CNT)
The value of the 16-bit counter can be read by reading the TQ0CNT register.
(f) TMQ0 capture/compare registers 0 to 3 (TQ0CCR0 to TQ0CCR3)
These registers store the count value of the 16-bit counter when the valid edge input to the TIQ0m pin is
detected.
Remarks 1. TMQ0 I/O control register 0 (TQ0IOC0) and TMQ0 I/O control register 2 (TQ0IOC2) are not
used in the pulse width measurement mode.
2. m = 0 to 3