Datasheet

V850ES/JG3 CHAPTRER 8 16-BIT TIMER/EVENT COUNTER Q (TMQ)
R01UH0015EJ0300 Rev.3.00 Page 363 of 870
Sep 30, 2010
(1/2)
Example when two capture registers are used (using overflow interrupt)
FFFFH
16-bit counter
0000H
TQ0CE bit
INTTQ0OV signal
TQ0OVF bit
TQ0OVF0 flag
Note
TIQ00 pin input
TQ0CCR0 register
TQ0OVF1 flag
Note
TIQ01 pin input
TQ0CCR1 register
D 10
D 11
D 00
D 01
D 10
<1> <2> <5> <6><3> <4>
D 00
D 11
D 01
Note The TQ0OVF0 and TQ0OVF1 flags are set on the internal RAM by software.
<1> Read the TQ0CCR0 register (setting of the default value of the TIQ00 pin input).
<2> Read the TQ0CCR1 register (setting of the default value of the TIQ01 pin input).
<3> An overflow occurs. Set the TQ0OVF0 and TQ0OVF1 flags to 1 in the overflow interrupt servicing,
and clear the overflow flag to 0.
<4> Read the TQ0CCR0 register.
Read the TQ0OVF0 flag. If the TQ0OVF0 flag is 1, clear it to 0.
Because the TQ0OVF0 flag is 1, the pulse width can be calculated by (10000H + D
01 − D00).
<5> Read the TQ0CCR1 register.
Read the TQ0OVF1 flag. If the TQ0OVF1 flag is 1, clear it to 0 (the TQ0OVF0 flag is cleared in <4>,
and the TQ0OVF1 flag remains 1).
Because the TQ0OVF1 flag is 1, the pulse width can be calculated by (10000H + D
11 − D10)
(correct).
<6> Same as <3>