Datasheet

V850ES/JG3 CHAPTER 8 16-BIT TIMER/EVENT COUNTER Q (TMQ)
R01UH0015EJ0300 Rev.3.00 Page 291 of 870
Sep 30, 2010
(9) TMQ0 capture/compare register 2 (TQ0CCR2)
The TQ0CCR2 register can be used as a capture register or a compare register depending on the mode.
This register can be used as a capture register or a compare register only in the free-running timer mode,
depending on the setting of the TQ0OPT0.TQ0CCS2 bit. In the pulse width measurement mode, the TQ0CCR2
register can be used only as a capture register. In any other mode, this register can be used only as a compare
register.
The TQ0CCR2 register can be read or written during operation.
This register can be read or written in 16-bit units.
Reset sets this register to 0000H.
Caution Accessing the TQ0CCR2 register is prohibited in the following statuses. For details, see 3.4.8 (2)
Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is stopped
• When the CPU operates with the internal oscillation clock
TQ0CCR2
12 10 8 6 4 2
After reset: 0000H R/W Address: FFFFF54AH
14 0
13 11 9 7 5 3
15 1