Datasheet

V850ES/JG3 CHAPTRER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
R01UH0015EJ0300 Rev.3.00 Page 236 of 870
Sep 30, 2010
Figure 7-22. Register Setting for Operation in One-Shot Pulse Output Mode (1/2)
(a) TMPn control register 0 (TPnCTL0)
0/1 0 0 0 0
TPnCTL0
Select count clock
0: Stop counting
1: Enable counting
0/1 0/1 0/1
TPnCKS2 TPnCKS1 TPnCKS0TPnCE
(b) TMPn control register 1 (TPnCTL1)
0 0/1 0 0 0
TPnCTL1
Generate software trigger
when 1 is written
011
TPnMD2 TPnMD1 TPnMD0TPnEEETPnEST
0, 1, 1:
One-shot pulse output mode
(c) TMPn I/O control register 0 (TPnIOC0)
0 0 0 0 0/1
TPnIOC0
0: Disable TOPn0 pin output
1: Enable TOPn0 pin output
Setting of output level while
operation of TOPn0 pin is disabled
0: Low level
1: High level
0: Disable TOPn1 pin output
1: Enable TOPn1 pin output
Specifies active level of
TOPn1 pin output
0: Active-high
1: Active-low
0/1 0/1
Note
0/1
Note
TPnOE1 TPnOL0 TPnOE0TPnOL1
TOPn1 pin output
16-bit counter
• When TPnOL1 bit = 0
TOPn1 pin output
16-bit counter
• When TPnOL1 bit = 1
Note Clear this bit to 0 when the TOPn0 pin is not used in the one-shot pulse output mode.