Datasheet

V850ES/JG3 CHAPTER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
R01UH0015EJ0300 Rev.3.00 Page 200 of 870
Sep 30, 2010
(8) TMPn capture/compare register 1 (TPnCCR1)
The TPnCCR1 register can be used as a capture register or a compare register depending on the mode.
This register can be used as a capture register or a compare register only in the free-running timer mode,
depending on the setting of the TPnOPT0.TPnCCS1 bit. In the pulse width measurement mode, the TPnCCR1
register can be used only as a capture register. In any other mode, this register can be used only as a compare
register.
The TPnCCR1 register can be read or written during operation.
This register can be read or written in 16-bit units.
Reset sets this register to 0000H.
Caution Accessing the TPnCCR1 register is prohibited in the following statuses. For details, see 3.4.8 (2)
Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is stopped
• When the CPU operates with the internal oscillation clock
TPnCCR1
(n = 0 to 5)
12 10 8 6 4 2
After reset: 0000H R/W Address: TP0CCR1 FFFFF598H, TP1CCR1 FFFFF5A8H,
TP2CCR1 FFFFF5B8H, TP3CCR1 FFFFF5C8H,
TP4CCR1 FFFFF5D8H, TP5CCR1 FFFFF5E8H
14 0
13 11 9 7 5 3
15 1