Datasheet

V850ES/JG3 CHAPTER 6 CLOCK GENERATION FUNCTION
R01UH0015EJ0300 Rev.3.00 Page 182 of 870
Sep 30, 2010
(2) Internal oscillation mode register (RCM)
The RCM register is an 8-bit register that sets the operation mode of the internal oscillator.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
0RCM 0 0 0 00 0 RSTOP
Internal oscillator oscillation
Internal oscillator stopped
RSTOP
0
1
Oscillation/stop of internal oscillator
After reset: 00H R/W Address: FFFFF80CH
< >
Cautions 1. The internal oscillator cannot be stopped while the CPU is operating on the internal
oscillation clock (CCLS.CCLSF bit = 1). Do not set the RSTOP bit to 1.
2. The internal oscillator oscillates if the CCLS.CCLSF bit is set to 1 (when WDT overflow
occurs during oscillation stabilization) even when the RSTOP bit is set to 1. At this time,
the RSTOP bit remains being set to 1.
(3) CPU operation clock status register (CCLS)
The CCLS register indicates the status of the CPU operation clock.
This register is read-only, in 8-bit or 1-bit units.
Reset sets this register to 00H.
0CCLS 0 0 0 0 0 0 CCLSF
After reset: 00H
Note
R Address: FFFFF82EH
Operating on main clock (f X ) or subclock (f XT ).
Operating on internal oscillation clock (f
R ).
CCLSF
0
1
CPU operation clock status
Note If WDT overflow occurs during oscillation stabilization after a reset is released, the CCLSF bit is set
to 1 and the reset value is 01H.