Hardware manual

e
2
studio 3.1 Release Note
Rev 1.4, Sep 23, 2014 Page 26
5665
CodeGenerator
plugin
The project kinds supported by Code Generator are below.
- C project - Executable (Renesas)
- C project - Executable (IAR) - Empty project
5666 Application
For RH850 multicore devices, trace view may not respond if the disassembly mode is selected.
Please do not use disassembly mode in trace view.
5668 Coverage plugin
In some cases when using the Coverage facility with the RL78 IECUBE some lines are shown as
'branch' or partial coverage when they should be 100% covered.
5669 Application
An invisible breakpoint is left in the project following a ‘Move To Line' operation. Program execution
continues to halt at this location once the Move to Line operation has been performed.
5670
V850 GCC build
plugin
When rebuilding an RH850/F1H project there should not be an active debug session or a build using
the GHS toolchain will fail.
5672 Trace plugin
RH850 F1H does not show trace core in Disassembly only mode. Add in Bus mode to show core
information too.
5674
CCRX Build
plugin
'''Problem'''
RTOS project is generated and build, CODAN error "Symbol xxx could not be resolved" is shown.
'''Workaround'''
Unchecked Preferences>Code Analysis>Syntax and Semantic Errors>Symbol is not resolved and
disable CODAN settings.
5677 Application
When importing projects into e2 studio using the Import and Rename option in some cases the
debug configurations are no longer available.
5693 GDB server RX
The PSW register shown in the register window does not match the PSW value at reset as shown in
the RX hardware manual.
5699
RZ Project
Generation
RZ projects do not include an iodefine.h.
To get this file please visit the RZ sample code area on the Renesas website.
5705
CCRX Build
plugin
'''Problem'''
When the "Renesas Toolchain Settings" is opened from the Optimization Assistant and clicked the
"Linker -> Section",null pointer exception occurs.
'''Workaround'''
Please select the project name and perform the right clicked menu "Renesas Tool Settings".
5708 GDB server RX
RX64M OFS1 setting: The voltage monitoring 0 reset function cannot be used. If OFS1 register is
modified by downloading to enable the voltage monitoring 0 reset function the emulator will modify
the register value to disable the voltage monitoring 0 reset function.