Hardware manual

e
2
studio 3.1 Release Note
Rev 1.4, Sep 23, 2014 Page 24
5471
CCRX Build
plugin
Problem
When the project is imported before CCRX project is created, "Cannot specify this option" may be
displayed even if the relation between FPU and CPU is correct.
'Workaround
Please perform import of a project after creating a project once.
5529 Application
When building a RTOS project using the CCRX toolchain it can show many CODAN errors even if
the include paths are set correctly.
[Work around]
Change the CODAN preferences. (Set "Symbol is not resolved" to be unchecked.)
5530 Application
Indexer settings are not persisted on a project import into e2 studio.
5531 Application
To use the data access events for RH850 with E1 emulator, the condition "Not Specified" in the
access size is treated as "Byte".
5539 Application
To use trace record events for RH850 with E1 emulator, trace start events are required.
5542 Trace plugin
If no records acquired in Trace View, tool bar buttons for trace conditions are disabled. To enable
them, once disable trace and enable it again.
5547 Application
To use the data access events as trace start, trace stop or trace record for RH850 with E1 emulator,
please do not use the "Compare Settings" condition for the event.
5551 Application
If the maximum number of break points are used for RX with E1/E20 emulator, the connection or the
program execution may fail. In this case, please reduce the using break points.
5569
RX GCC build
plugin
GNU (RX) assembly list is not generated for the last compiled C source file in the build. The work
around is to specify the options for this file specifically for the list file setting.
5572 Waveform plugin
[Phenomenon]
The line connecting point y=0 to point y=2 of chart in stereo channel, 8bits data size is not fulfilled.
5573 Waveform plugin
More sample data than the user has requested is displayed on the waveform view after making the
buffer size smaller than a previously larger buffer.
5575
CodeGenerator
plugin
The dialogue which confirms the save of a project of code generation isn't indicated.
The condition is the case that e2studio opens debugging perspective and doesn't open a panel of
code generator.
5576 GDB
For RH850 multicore devices, step return may cause the error. Please do not use step return
execution. Instead, try 'finish' command in GDB console.
5586
CodeGenerator
plugin
When importing project which did an export by CS+ in e2 studio, the setting contents of code
generator aren't reflected.
5587
CodeGenerator
plugin
Even when the source code generated by a code generator became unnecessary by change in the
setting of a code generator, source code will be while being made the build target.
When source code became unnecessary, please open a property of source code and check
"Exclude resource from build".