Hardware manual

e
2
studio 3.1 Release Note
Rev 1.4, Sep 23, 2014 Page 13
5202 Debug Console plugin
Changing text encoding into a non UTF-8 setting, such as Shift-JIS also changes
the setting for the debug console.
To stop this happening you can modify the setting for "Encoding" to not inherit on
the debug configuration, common tab.
5216 Application
The KPIT RZ GCC toolchain is no longer supported within e2 studio. Instead you
must download the new KPIT ARM-none-eabi GCC toolchain which is available
from the KPIT website.
The KPIT ARM-none-
eabi 14.01 release is exactly the same as the KPIT RZ 14.01
release but with a different name. This is the only difference.
5244 Application
When using the RX Simulator in some cases the program can stop at a breakpoint
which was already removed.
5266 CubeSuite+ importer/exporter
When importing a CubeSuite+ project a build error occurs in some cases. This
was due to the %ProjectDir% which is a placeholder for CS+ which should be
converted as ${ProjDirPath?}. This was not happening correctly.
5267 CubeSuite+ importer/exporter
When a RX64M project is imported the "-rx-force-v2" option for gdb was missing.
This option needs to be specified for successful RX64M connection.
5271 Application
As now -mcpu=rx100 option is supported by GNURX toolchain from v13.01
onwards, e2 studio should handle the cpu command based on CPU selection and
toolchain version.
5272 Application
The RL78 GCC Linker section displays the same address for stack and data
section only for debug configuration
5273 Application
The edit eventpoint dialog for a 'data access' type shows address conditions,
'address mask' and 'end address' when using the RL78. These are not supported
for this debugger so should be disabled.
5274 Application
To see saved trace file, users have to do two steps:
First they need to "Load trace file" and then check "View Saved Trace". The
second step should not be necessary.
5277 Application
In certain situations when using CCRX there were problems displaying local
variables.
5280 RL78 GCC build plugin
There are Non-G13 devices (except G10, G14, F13&14) which have external
multiplier capability with -mmul=g13 option.
Therefore this option needs to be made available for more devices.
5324 Memory Usage plugin
The memory usage view fails to read the map file correctly to determine memory
usage when the map file contains some sections that not belong to the RAM and
ROM area.
5326 CCRX Build plugin
When importing a CCRX project from HEW to e2 studio some the -
nostuff option is
not converted correctly.
5349 Coverage plugin
In the coverage view variable type information and the related data is not listed
correctly for each variable.