Technical information

Section 3 Software Specifications when Using the SH72546RFCC, SH72544R, SH72543R, SH72531, and SH72531FCC
Rev. 2.00 Feb. 18, 2009 Page 77 of 94
REJ10J1938-0200
mode 5 (PLL x 6, P = EXTAL x 2): MD_CLKP = 1, MD_CLK1 = 0,
and MD_CLK0 = 1
mode 6 (PLL x 10, P = EXTAL x 2): MD_CLKP = 1, MD_CLK1 =
1, and MD_CLK0 = 0
mode 7 (PLL x 8, P = EXTAL x 2): MD_CLKP = 1, MD_CLK1 = 1,
and MD_CLK0 = 1
[User
system
Clock
Mode]
Settings of the corresponding pins on the user system are
reflected in MD_CLKP, MD_CLK1, and MD_CLK0.