Technical information

Rev. 2.00 Feb. 18, 2009 Page v of vi
REJ10J1938-0200
Contents
Section 1 System Configuration ........................................................................1
1.1 Components of the Emulator ............................................................................................ 1
1.2 System Configuration ....................................................................................................... 5
Section 2 Connecting the Emulator to the User System ....................................9
2.1 Connecting the Emulator to the User System ................................................................... 9
2.2 Connecting the Emulator to the User System by Using the EV-chip Unit........................ 9
2.2.1 Connecting the EV-chip Unit to the Emulator..................................................... 9
2.2.2 Connecting the E200F Expansion AUD Trace Unit to the EV-chip Unit............ 12
2.2.3 Connecting the H-UDI/AUD Probe to the EV-chip Unit..................................... 14
2.2.4 Connecting the E200F Expansion AUD Trace Unit, Emulation Memory Unit,
and EV-chip Unit.................................................................................................15
2.2.5 Connecting the EV-chip Unit to the User System Interface Cable ...................... 16
2.2.6 Using the E200F Emulator as a Stand-Alone Unit ..............................................18
2.3 Connecting the Emulator to the User System by Using the H-UDI Port Connector......... 19
2.4 Installing the H-UDI Port Connector on the User System ................................................ 20
2.5 Pin Assignments of the H-UDI Port Connector ................................................................ 21
2.6 Recommended Circuit between the H-UDI Port Connector and the MCU ......................25
2.6.1 Recommended Circuit (36-Pin Type)..................................................................25
2.7 Using the IC Socket to Mount an MCU on the User System............................................ 28
Section 3 Software Specifications when Using the SH72546RFCC, SH72544R,
SH72543R, SH72531, and SH72531FCC.........................................33
3.1 Differences between the MCU and the Emulator ............................................................. 33
3.2 Specific Functions for the Emulator when Using the SH72546RFCC, SH72544R,
SH72543R, SH72531, and SH72531FCC......................................................................... 39
3.2.1 Event Condition Functions .................................................................................. 39
3.2.2 Trace Functions.................................................................................................... 46
3.2.3 Notes on Using the JTAG (H-UDI) Clock (TCK) and AUD Clock (AUDCK)... 67
3.2.4 Notes on Setting the [Breakpoint] Dialog Box .................................................... 67
3.2.5 Notes on Setting the [Event Condition] Dialog Box and
the BREAKCONDITION_ SET Command ........................................................ 68
3.2.6 Performance Measurement Function ................................................................... 68
3.2.7 Emulation RAM Setting Function ....................................................................... 72
3.2.8 [Select Emulation] Dialog Box at Activation of the Emulator ............................75
3.2.9 [Configuration] Dialog Box................................................................................. 78