Technical information

Section 2 Connecting the Emulator to the User System
Rev. 2.00 Feb. 18, 2009 Page 15 of 94
REJ10J1938-0200
2.2.4 Connecting the E200F Expansion AUD Trace Unit, Emulation Memory Unit, and
EV-chip Unit
• When the expansion AUD trace unit is used with the emulation memory unit and EV-chip unit,
as shown in figure 2.6, connect them in the positions of (a), (b), and (c) for the expansion AUD
trace unit, emulation memory unit, and EV-chip unit, respectively.
• After checking the location of pin 1, connect the expansion AUD trace unit, emulation memory
unit, and EV-chip unit.
Figure 2.6 Connecting the Expansion AUD Trace Unit, Emulation Memory Unit, and EV-
chip Unit
CAUTION
Check the location of pin 1 and the position of each unit
before connecting.