Technical information

Section 1 System Configuration
Rev. 2.00 Feb. 18, 2009 Page 2 of 94
REJ10J1938-0200
Table 1.1 Components of the Emulator (cont)
Classi-
fication Component Appearance
Quan-
tity Remarks
Hard-
ware
(cont)
USB cable
1 Length: 1500 mm, Mass: 50.6 g
External probe Product numbers: 0001 to 0113
1 Length: 500 mm,
Pins 1 to 4: probe input pins,
T: trigger output pin,
G: GND pin
Product numbers: 0114 or after
1 Length: 500 mm,
Pins 1 to 4: probe input pins,
T: trigger output pin,
G: GND pin
Soft-
ware
E200F emulator setup
program,
SH-2A, SH-2 E200F
Emulator User’s Manual,
and
Supplementary
Information on Using the
SH72546RFCC,
SH72544R, SH72543R,
SH72531, and
SH72531FCC*
1 R0E0200F1EMU00S,
R0E0200F1EMU00J,
R0E0200F1EMU00E,
R0E572546EMU00J,
R0E572546EMU00E
(provided on a CD-R)
Note: Additional document for the MCUs supported by the emulator is included. Check the target
MCU and refer to its additional document.