Hardware manual

e
2
studio 3.1 Release Note
Rev 1.0, Jan 21st, 2015 Page 15
5628
Application
When debugging RZ devices the IO Register window remains empty. It
should show the IO registers for these devices.
5659
Profile plugin
The workaround for Profile not working on subsequent debug sessions is
to restart e
2
studio.
5731
GDB Server RZ
When viewing IO registers for the RZ debugger the values are not shown
correctly in the memory view or IO Registers view.
5751
Project Generation
New projects that are created for the RZ device family do not include an
iodefine.h file.
5752
Application
When updating dependencies in a build for the ARM GCC toolchain the
following error can be displayed. This error occurs when assembly
source files are present in the ARM GCC project.
"*.d: *** Missing separator. Stop."
The only workaround is to delete the .d file mentioned in the error.
5754
Application
RZ projects from previous e
2
studio products that use the KPIT RZ GCC
toolchain are not importing to the new KPIT ARM-none toolchain
correctly. The paths are not corrected.
5772
IAR Plugins
The IAR Plugin Manager is now included in e
2
studio. This provides
support for RX, RL78, RH850 and RZ (ARM).
This is a tool which simplifies installation and configuration of IAR
toolchain plugins. You can access this though Help -> IAR Embedded
Workbench plugin manager.
In some cases you may need to remove existing IAR RX & RL78 plugins
to install other newly supported device plugins (e.g. RH850).
5841
Application
On Japanese Windows a problem was noted for GCC projects. When a
user is using a non-default value for the “Command file override” option
in the linker settings it can cause the build to fail.
This is often more noticeable when using additional settings in the C run-
time library from defaults also.