Hardware manual

e
2
studio 3.1 Release Note
Rev 1.0, Jan 21st, 2015 Page 13
5569
RX GCC build plugin
GNU (RX) assembly list is not generated for the last compiled C source
file in the build.
The work around is to specify the options for this file specifically for the
list file setting.
5586
Code Generator plugin
When importing project which did an export by CS+ in e
2
studio, the
setting contents of code generator aren't reflected.
5598
GDB server RL78
When using RL78 104LE, display the PORT branch in the IO Registers
window. The values displayed for this registers does not correspond to
the data in the memory view at the same location.
5616
Code Generator plugin
An input of a project name may delay a character input.
The cause is loading Code Generator plugin module.
5622
Project Generation
Regardless of using trusted memory, TMEF and TMINF register settings
are necessary and should be pre-set before running RX64M device.
The values are placed typically in vector table. See the device hardware
manual for the details.
If Trusted Memory is not used, 0xffffffff (==factory default) should be set
for both TMEF and TMINF registers to avoid unexpected behaviour.
5652
Application
The debugger does not show the contents of float variables in a structure
correctly when the compiler option "Pack structures" is used. This is with
the CCRX toolchain.
5656
Multicore
For RH850 multicore devices the connection process can stall if there
are active breakpoints in the project. To remedy disable the breakpoints
before connection and enable once connected.
5662
FIT plugin
The FIT Wizard selections for "Toolchain", "Application" and "Function"
have been temporarily disabled and will be re-organized again in the
next release.
5674
CCRX Build plugin
RTOS project is generated and build, CODAN error "Symbol xxx could
not be resolved" is shown.
5677
Application
When importing projects into e
2
studio using the Import and Rename
option in some cases the debug configurations are no longer available.
5699
Project Generation
The included RZ project generators in e
2
studio do not currently include
iodefine.h files.
5705
CCRX Build plugin
When the "Renesas Toolchain Settings" is opened from the Optimization
Assistant and clicked the "Linker -> Section",null pointer exception
occurs.
Please select the project name and perform the right clicked menu
"Renesas Tool Settings".
5707
FIT plugin
If a FIT module with missing dependencies is selected, the FIT Wizard
will try to add a later version of the same dependency found in the
installation folder.