Hardware manual

e
2
studio 3.1 Release Note
Rev 1.0, Jan 21st, 2015 Page 11
5903
Code
Generator
For the following RL78 code generator project, "Peripheral Functions" view tabs
may not be operated with double-clicking "Peripheral Functions" branch of
Project Explorer view.
After creating/loading the project, please show "Code Preview" view by double-
clicking of "Code preview" branch at Project Explorer tree at first. Then, please
access Code Generator setting tabs by double-clicking Project Explorer tree or
using pull-down menu by pressing triangle button at the up-right corner of
Peripheral Functions view.
RL78/G12, RL78/G13, RL78/G14, RL78/G1A, RL78/I1A, RL78/F13, RL78/F14,
RL78/F12, RL78/L12
6026
RTOS Project
Problem: RTOS project for RX71M cannot be created in this version of e
2
studio.
Workaround: Please create the project for RX64M and customize this project.
6242
CCRX Build
Problem: When the library project for RX71M is created, the following Build
error occurs.
E0511175: Neither isa nor cpu is specified.
Workaround: Please specify the -isa=rxv2.
6256
Debug
Configuration
When visiting the debug configuration on German Windows the Operating
Frequency is modified from a 24,000 to 24.000 when using RX71M. On
German Windows the decimal separator should be shown as a ‘,’. Once
changed back debug connection is possible however visiting the debug
configuration again will again change the ‘,’ to a ‘.’.