Technical information

Rev. 4.00 Jan.13, 2010 Page vi of vi
REJ10J1271-0400
Contents
Section 1 Connecting the Emulator with the User System..................................1
1.1 Components of the Emulator ............................................................................................ 1
1.2 Connecting the Emulator with the User System ...............................................................2
1.3 Installing the H-UDI Port Connector on the User System................................................2
1.4 Pin Assignments of the H-UDI Port Connector................................................................2
1.5 Recommended Circuit between the H-UDI Port Connector and the MCU ......................4
1.5.1 Recommended Circuit (14-Pin Type)..................................................................4
Section 2 Software Specifications when Using the SH7125 or SH7124 Group .7
2.1 Differences between the MCU and the Emulator ............................................................. 7
2.2 Specific Functions for the Emulator when Using the SH7125 or SH7124 Group............11
2.2.1 Event Condition Functions .................................................................................. 11
2.2.2 Trace Functions ...................................................................................................15
2.2.3 Notes on Using the JTAG (H-UDI) Clock (TCK)...............................................15
2.2.4 Notes on Setting the [Breakpoint] Dialog Box.................................................... 15
2.2.5 Notes on Setting the [Event Condition] Dialog Box and
the BREAKCONDITION_ SET Command ........................................................ 16
2.2.6 Performance Measurement Function ................................................................... 16
2.2.7 Profiling Measurement Function ......................................................................... 16