Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
(2) Table 2.2 is a list of the components of the SH7125 series debugging MCU board.
In the product package as shipped, the main unit of the debugging MCU board is connected to the user system
interface board with flexible flat cables (FFC). Do not detach the boards from each other.
Table 2.2 Components of the SH7125 Series Debugging MCU Board
Classi-
fication
Component
Appearance
Quan-
tity
Remarks
Hardware
Debugging MCU
board main unit
1
Depth: 80.0 mm, Width:
85.0 mm,
Height: 22.3 mm, Mass:
55.2 g
*The main unit of the
debugging MCU board is
connected to the user
system interface board with
the FFC cables. Do not
disconnect these
components.
FFC cables 2
Length: 150.0 mm, Mass:
1.4 g
User system
interface board
1
Depth: 35.0 mm, Width:
40.0 mm,
Height: 10.3 mm, Mass: 8.5
g
Power cable 1 Length: 0.5 m
IC socket 1
Connect the IC socket to
the user system.
*The IC socket provided will
differ according to the
supported MCU.
Socket cover 1 For installing the MCU
*The socket cover provided
will differ according to the
supported MCU.
Screws
(M2.0 x 10 mm)
4
For fastening the user
system interface board
Screws
(M2.0 x 6 mm)
4
For fastening the socket
cover
REJ06J0007-0100/Rev.1.00 February 2007 Page 5 of 43