Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
2. Components and Environment
This section shows the components of the E10A-USB emulator and the SH7125 series debugging MCU board. Unpack
the E10A-USB emulator and MCU board packages and check the components against the component lists.
2.1 Components
(1) Table 2.1 is a list of the E10A-USB emulator components.
Table 2.1 Components of the E10A-USB Emulator
Classi-
fication Component Appearance
Quan-
tity Remarks
Emulator box 1 HS0005KCU01H:
Depth: 65.0 mm, Width: 97.0 mm,
Height: 20.0 mm, Mass: 72.9 g
or
HS0005KCU02H:
Depth: 65.0 mm, Width: 97.0 mm,
Height: 20.0 mm, Mass: 73.7 g
User system interface
cable
1 14-pin type:
Length: 20 cm, Mass: 33.1 g
User system interface
cable
1 36-pin type:
Length: 20 cm, Mass: 49.2 g
(only for HS0005KCU02H)
Hard-
ware
USB cable
1 Length: 150 cm, Mass: 50.6 g
Soft-
ware
E10A-USB emulator
setup program,
SuperH
TM
Family E10A-
USB Emulator User’s
Manual,
Supplementary
Information on Using the
SH7125 Series
Debugging MCU Board*,
and
Test program manual for
HS0005KCU01H and
HS0005KCU02H
1
HS0005KCU01SR,
HS0005KCU01HJ,
HS0005KCU01HE,
HS7125DBKCU01HJ,
HS7125DBKCU01HE,
HS0005TM01HJ, and
HS0005TM01HE
(provided on a CD-R)
Note: Additional documents for the MCUs supported by the emulator are included. Check the target MCU
and refer to its additional document.
REJ06J0007-0100/Rev.1.00 February 2007 Page 4 of 43