Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
(5) The [System Clock] dialog box will appear. Enter the oscillating frequency of the crystal resonator installed on the
MCU board and click the [OK] button. In this example, a 12-MHz crystal resonator is used, so "12.00" (12.00 MHz)
is entered.
Figure 6.24 Specifying Operating Frequency
(6) The [ID Code] dialog box will appear. Enter "E10A" here and click the [OK] button.
Figure 6.25 Specifying the ID Code
(7) While the E10A-USB emulator connection is in progress, the [Connecting] dialog box is shown.
Figure 6.26 Dialog Box Shown during E10A-USB Emulator Connection
REJ06J0007-0100/Rev.1.00 February 2007 Page 29 of 43