Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
(4) If the directory information of the workspace differs from the current directory, a dialog box will prompt you to
confirm the current directory. Click the [Yes] button.
Figure 6.18 Dialog Box for Confirming Current Workspace Directory
REJ06J0007-0100/Rev.1.00 February 2007 Page 27 of 43
6.3.3 Connecting the E10A-USB Emulator
(1) The [Select Emulator mode] dialog box will appear.
Figure 6.19 Selecting the Emulator Mode
In the [Device] menu, the name of the device mounted on the user system should be specified.
Select [SH7125_Debug_MCU_BOARD] here.
Select the [E10A-USB Emulator] radio button for [Mode] and click the [OK] button.
(2) When the E10A-USB emulator is connected for the first time, the [Please choose driver] dialog box will appear.
Click the [OK] button.
Figure 6.20 Prompt to Choose the Driver for the First-Time Connection of the E10A-USB Emulator