Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
(2) The [Open Workspace] dialog box will appear.
Figure 6.15 Selecting a Workspace File
When the software from the CD-ROM of this product has been installed, workspace "Tutorial.hws" is stored in the
folder structure shown below (standard location). Specify the correct location by opening the folders in order. Select
the workspace "Tutorial.hws" and click the [Select] button.
REJ06J0007-0100/Rev.1.00 February 2007 Page 26 of 43
Figure 6.16 Folder Including the Workspace File
The above folder may not be specifiable depending on the user environment. In this case, select the following folder.
C:\hew3\Tools\Renesas\DebugComp\Platform\E10-USB\SH-2\SH7080Series\Tutorial_SH7125MCUSeries
C:\hew2\Tools\Renesas\DebugComp\Platform\E10-USB\SH-2\SH7080Series\Tutorial_SH7125MCUSeries
Note: The drive name C: should be read as the name of the drive where the OS is installed in your computer.
(3) If the workspace version is old, the following dialog box will appear. To update it to the new version, click the [OK]
button.
C:\WorkSpace
Tutorial
E10A-USB
SH-2
SH7080Series
Tutorial_SH7125MCUSeries
Tutorial.hws
C:\WorkSpace\Tutorial\E10A-USB\SH-2\SH7080SerTutorial\Tutorial_SH7125MCUSeries\Tutorial.hws
Figure 6.17 Dialog Box Shown for Old-Version Workspace