Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
6.2 Activating the High-performance Embedded Workshop
6.2.1 Activating the High-performance Embedded Workshop
Activate the High-performance Embedded Workshop by opening the [Start] menu and selecting [All Programs],
[Renesas], [High-performance Embedded Workshop], and [High-performance Embedded Workshop] in that order.
Figure 6.5 Activating the High-Performance Embedded Workshop
This guide shows an example where the High-performance Embedded Workshop has been updated to V.4.01.xx
through the Renesas website.
6.3 Sample Program Execution Procedures
This section guides you through the procedures for loading the sample program in memory, executing it, and viewing
the resultant trace information through the following procedures.
End of Operation
Opening a workspace
Loading a sample program
Opening a source file
Setting a breakpoint
Executing a program
Break occurrence
Viewing trace information
Connecting the E10A-USB emulator
Set up the E10A-USB
(Execute E1setup.exe for the target
device group)
Start of operation
Figure 6.6 Procedures for Sample Program Execution
REJ06J0007-0100/Rev.1.00 February 2007 Page 21 of 43