Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
(5) The [License Agreement] dialog box will appear. Read the contents and click the [Yes] button.
Figure 4.4 License Agreement for the E10A-USB Emulator Software
(6) The [Choose Destination Location] dialog box will appear. To change [Installation folder], click the [Browse…]
button and select the target folder. Check [Installation folder], and click the [Next] button. This guide shows an
example of using the default installation folder.
Figure 4.5 Choosing the Folder for E10A-USB Emulator Software Installation
The installation folder may differ depending on the version of the High-performance Embedded Workshop earlier
installed.
(a) The emulator software is installed in the same folder as the High-performance Embedded Workshop Ver.2.
When the High-performance Embedded Workshop Ver.2 was installed first and then updated (Ver.2->Ver.3,
Ver.2->Ver.4, or Ver.2->Ver.3->Ver.4).
(b) The emulator software is installed in the same folder as the High-performance Embedded Workshop Ver.3.
When the High-performance Embedded Workshop Ver.3 was installed first.
REJ06J0007-0100/Rev.1.00 February 2007 Page 11 of 43