Technical information

Renesas E10A-USB Emulator
Introductory Guide for SH/Tiny (SH7125)
4. Installing the Software
4.1 Installing the Provided Software
4.1.1 Before Starting Installation
(1) Do not connect the E10A-USB emulator to the host computer before the provided software is installed.
 Installing the provided software transfers the E10A-USB emulator driver to the host computer, and the new
hardware detection processing will automatically start.
(2) When you have both the free evaluation version and the production version of the compiler, use the production
version.
 If you have installed the production-version C/C++ compiler package for the SuperH RISC engine family, or
if you purchased a production-version compiler package and E10A-USB emulator together, you do not need to
install the free-evaluation version.
 For the limitations on the free evaluation-version C/C++ compiler package for the SuperH RISC engine
family, refer to section 7.1, Limitations on Free Evaluation-Version C Compiler.
(3) Dialog Boxes for Installation
 If you have installed the High-performance Embedded Workshop in the target host computer, some dialog boxes
may be skipped during the provided software installation.
4.1.2 How to Install the Software
(1) The following shows the procedure for installing the software necessary for the E10A-USB emulator. Insert the
E10A-USB emulator CD-ROM in the host computer and the installation program will automatically start through
the automatic play function of the drive.
If the installation program does not start, execute Autorun.exe from the CD-ROM. For details on the CD-ROM,
refer to section 2.4, CD-ROM.
(2) The [Choose Setup Language] dialog box will appear. Select [English] and click the [Next] button.
Figure 4.1 Choosing the Language for Installation
REJ06J0007-0100/Rev.1.00 February 2007 Page 9 of 43