User`s manual

Section 1 System Configuration
Rev. 3.00 Oct. 17, 2008 Page 2 of 66
REJ10J1662-0300
Table 1.1 Components of the Emulator (cont)
Classi-
fication Component Appearance
Quan-
tity Remarks
Hard-
ware
(cont)
USB cable
1 Length: 1500 mm, Mass: 50.6 g
External probe E200F serial numbers: 0001 to 0113
1 Length: 500 mm,
Pins 1 to 4: probe input pins,
T: trigger output pin,
G: GND pin
E200F serial numbers: 0114 or later
1 Length: 500 mm,
Pins 1 to 4: probe input pins,
T: trigger output pin,
G: GND pin
Soft-
ware
E200F emulator setup
program,
SH-2A, SH-2 E200F
Emulator User’s Manual,
and
Supplementary
Information on Using the
SH7286, SH7285, and
SH7243*
1 R0E0200F1EMU00S,
R0E0200F1EMU00J,
R0E0200F1EMU00E,
R0E572800EMU00J, and
R0E572800EMU00E
(provided on a CD-R)
Note: Additional document for the MCUs supported by the emulator is included. Check the target
MCU and refer to its additional document.