User`s manual

Section 3 Software Specifications when Using the SH7286, SH7285, and SH7243
Rev. 3.00 Oct. 17, 2008 Page 52 of 66
REJ10J1662-0300
(b) Window Trace Function
Memory access in the specified range can be acquired by trace.
Two memory ranges can be specified for channels A and B. The read, write, or read/write
cycle can be selected as the bus cycle for trace acquisition.
Setting Method:
(i) Select the [Channel A] and [Channel B] check boxes in the [AUD function] group
box of the [Trace mode] page. Each channel will become valid.
(ii) Open the [Window trace] page and specify the bus cycle and memory range that are to be
set for each channel.
Figure 3.5 [Window trace] Page