User`s manual

Rev. 3.00 Oct. 17, 2008 Page v of vi
REJ10J1662-0300
Contents
Section 1 System Configuration ........................................................................1
1.1 Components of the Emulator ............................................................................................ 1
1.2 System Configuration ....................................................................................................... 5
Section 2 Connecting the Emulator to the User System....................................9
2.1 Connecting the Emulator to the User System ................................................................... 9
2.2 Connecting the Emulator to the User System by Using the EV-chip Unit........................ 9
2.2.1 Connecting the EV-chip Unit to the Emulator......................................................... 9
2.2.2 Connecting the E200F External Bus Trace Unit to the EV-chip Unit ..................... 12
2.2.3 Connecting the H-UDI/AUD Probe to the EV-chip Unit ........................................ 14
2.2.4 Connecting the E200F Emulation Memory Unit to the EV-chip Unit..................... 15
2.2.5 Connecting the E200F External Bus Trace Unit, Emulation Memory Unit, and
EV-chip Unit............................................................................................................ 17
2.2.6 Connecting the EV-chip Unit to the User System Interface Board.......................... 18
2.2.7 Using the E200F Emulator as a Stand-Alone Unit .................................................. 19
2.3
Connecting the Emulator to the User System by Using the H-UDI Port Connector......... 20
2.4 Installing the H-UDI Port Connector on the User System ................................................ 21
2.5 Pin Assignments of the H-UDI Port Connector................................................................ 21
2.6 Recommended Circuit between the H-UDI Port Connector and the MCU ...................... 23
2.6.1 Recommended Circuit (36-Pin Type)...................................................................... 23
2.7 Using the IC Socket to Mount an MCU on the User System............................................ 26
Section 3 Software Specifications when Using the SH7286, SH7285, and
SH7243 ..............................................................................................29
3.1 Differences between the MCU and the Emulator ............................................................. 29
3.2 Specific Functions for the Emulator when Using the SH7286, SH7285, and SH7243..... 36
3.2.1 Event Condition Functions ...................................................................................... 36
3.2.2 Trace Functions ....................................................................................................... 43
3.2.3 Notes on Using the JTAG (H-UDI) Clock (TCK) and AUD Clock (AUDCK) ...... 54
3.2.4 Notes on Setting the [Breakpoint] Dialog Box ........................................................ 54
3.2.5 Notes on Setting the [Event Condition] Dialog Box and
the BREAKCONDITION_ SET Command ............................................................ 55
3.2.6 Performance Measurement Function ....................................................................... 55
Section 4 User System Interface Circuits ............................................................61
4.1 User System Interface Circuits ......................................................................................... 61