User`s manual

Section 2 Connecting the Emulator to the User System
Rev. 3.00 Oct. 17, 2008 Page 21 of 66
REJ10J1662-0300
2.4 Installing the H-UDI Port Connector on the User System
Table 2.2 shows the recommended H-UDI port connectors for the emulator.
Table 2.2 Recommended H-UDI Port Connectors
Connector Type Number Manufacturer Specifications
36-pin connector DX10M-36S Hirose Electric Co., Ltd. Screw type
DX10M-36SE,
DX10G1M-36SE
Lock-pin type
Note: When designing the 36-pin connector layout on the user board, do not connect any
components under the H-UDI connector.
2.5 Pin Assignments of the H-UDI Port Connector
Figure 2.11 shows the pin assignments of the 36-pin H-UDI port connectors.
Note: Note that the pin number assignments of the H-UDI port connector shown on the
following page differ from those of the connector manufacturer.