User`s manual

Section 1 System Configuration
Rev. 3.00 Oct. 17, 2008 Page 5 of 66
REJ10J1662-0300
1.2 System Configuration
Figure 1.1 shows an example of the emulator system configuration.
USB 2.0/1.1
E200F
Expansion profiling unit
PC
USB 2.0/1.1
E200F
PC
User system
IC socket
External bus
trace unit
User system
interface board
Trace cable
High-performance
Embedded Workshop
High-performance
Embedded Workshop
- When the EV-chip unit is not used:
User system
H-UDI and AUD
- When the EV-chip unit is not used:
H-UDI port connector
Expanded profilling unit
Emulation
memory unit
EV-chip unit
Figure 1.1 System Configuration Using the Emulator
(1) System Configuration of the SH7280 Series and the SH7243 Series
Table 1.3 shows the system configuration supported by the SH7280 series and the SH7243
series.