User`s manual

Section 1 Connecting the Emulator with the User System SuperH™ Family E10A-USB Emulator
Page 2 of 46 REJ10J1941-0300 Rev. 3.00
Aug 25, 2010
Table 1.1 Components of the Emulator
Classi-
fication Component Appearance
Quan-
tity Remarks
Hard-
ware
Emulator box
1 HS0005KCU01H:
Depth: 65.0 mm, Width: 97.0 mm,
Height: 20.0 mm, Mass: 72.9 g
or
HS0005KCU02H:
Depth: 65.0 mm, Width: 97.0 mm,
Height: 20.0 mm, Mass: 73.7 g
User system interface
cable
1 14-pin type:
Length: 20 cm, Mass: 33.1 g
User system interface
cable
1 36-pin type:
Length: 20 cm, Mass: 49.2 g
(only for HS0005KCU02H)
USB cable 1 Length: 150 cm, Mass: 50.6 g
Soft-
ware
E10A-USB emulator setup
program,
SuperH
TM
Family E10A-
USB Emulator User’s
Manual,
Supplementary
Information on Using the
SH72546RFCC,
SH72546R, SH72544R,
SH72543R,
SH72531RFCC,
SH72531FCC, and
SH72531*, and
Test program manual for
HS0005KCU01H and
HS0005KCU02H
1 HS0005KCU01SR,
HS0005KCU01HJ,
HS0005KCU01HE,
HS7250KCU01HJ,
HS7250KCU01HE,
HS0005TM01HJ, and
HS0005TM01HE
(provided on a CD-R)
Note: Additional document for the MCUs supported by the emulator is included. Check the target
MCU and refer to its additional document.