User`s manual

Section 2 Software Specifications when Using the Emulator SuperH™ Family E10A-USB Emulator
Page 44 of 46 REJ10J1941-0300 Rev. 3.00
Aug 25, 2010
2.2.7 Emulation RAM Setting Function
The emulation RAM can be set in the [Memory Mapping] dialog box which is opened by selecting
[Setup] -> [Emulator] -> [Memory…] from the menu.
The emulator incorporates 8-block emulation RAM in each 64-kbyte unit, which can be set in each
64-kbyte boundary within the address ranges from H’00000000 to H’001FFFFF.
The emulation RAM is overlapped with the address of the internal flash memory. Using the
emulation RAM proceeds debugging without rewriting the program or data on the internal flash
memory.
When the emulation RAM is not used in the emulator, it can be used as the internal RAM for
debugging.
Figure 2.7 [Memory Mapping] Dialog Box