User`s manual

Contents
Section 1 Connecting the Emulator with the User System ....................................1
1.1 Components of the Emulator ....................................................................................................1
1.2 Connecting the Emulator with the User System .......................................................................3
1.3 Installing the H-UDI Port Connector on the User System........................................................4
1.4 Pin Assignments of the H-UDI Port Connector........................................................................5
1.5 Recommended Circuit between the H-UDI Port Connector and the MCU ..............................9
1.5.1 Recommended Circuit (36-Pin Type)..........................................................................9
1.5.2 Recommended Circuit (14-Pin Type)..........................................................................11
1.5.3 Recommended Circuit (38-Pin Type)..........................................................................13
Section 2 Software Specifications when Using the Emulator ...............................15
2.1 Differences between the SH72546RFCC, SH72546R, SH72544R, SH72543R,
SH72531RFCC, SH72531FCC, and SH72531 and the Emulator ............................................15
2.2 Specific Functions for the Emulator when Using the SH72546RFCC, SH72546R,
SH72544R, SH72543R, SH72531RFCC, SH72531FCC, and SH72531..................................20
2.2.1 Event Condition Functions ..........................................................................................20
2.2.2 Trace Functions ...........................................................................................................26
2.2.3 Notes on Using the JTAG (H-UDI) Clock (TCK).......................................................38
2.2.4 Notes on Setting the [Breakpoint] Dialog Box ............................................................38
2.2.5 Notes on Setting the [Event Condition] Dialog Box and
the BREAKCONDITION_SET Command .................................................................39
2.2.6 Performance Measurement Function ...........................................................................39
2.2.7 Emulation RAM Setting Function ...............................................................................44