User`s manual

Section 2 Software Specifications when Using the Emulator SuperH™ Family E10A-USB Emulator
Page 34 of 46 REJ10J1941-0300 Rev. 3.00
Aug 25, 2010
When the AUD trace function is used, select the [AUD function] radio button in the [Trace type]
group box of the [Trace mode] page.
(a) Branch Trace Function
The branch source and destination addresses and their source lines are displayed.
Branch trace can be acquired by selecting the [Branch trace] check box in the [AUD function]
group box of the [Trace mode] page.
The branch type can be selected in the [AUD Branch trace] page.