User`s manual

SuperH™ Family E10A-USB Emulator Section 1 Connecting the Emulator with the User System
R20UT2190EJ0100 Rev.1.00 Page 1 of 34
Aug 09, 2012
Section 1 Connecting the Emulator with the User System
1.1 Components of the Emulator
The emulator supports the SH7766. Table 1.1 lists the components of the emulator.
Table 1.1 Components of the Emulator
Classi-
fication Component Appearance
Quan-
tity Remarks
Hard-
ware
Emulator box
1 HS0005KCU01H:
Depth: 65.0 mm, Width: 97.0 mm,
Height: 20.0 mm, Mass: 72.9 g
or
HS0005KCU02H:
Depth: 65.0 mm, Width: 97.0 mm,
Height: 20.0 mm, Mass: 73.7 g
User system interface
cable
1 14-pin type:
Length: 20 cm, Mass: 33.1 g
User system interface
cable
1 36-pin type:
Length: 20 cm, Mass: 49.2 g
(only for HS0005KCU02H)
USB cable 1 Length: 150 cm, Mass: 50.6 g
Soft-
ware
E10A-USB emulator setup
program,
SuperH
TM
Family E10A-
USB Emulator User’s
Manual,
Supplementary
Information on Using the
SH7766*, and
Test program manual for
HS0005KCU01H and
HS0005KCU02H
1 HS0005KCU01SR,
HS0005KCU01HJ,
HS0005KCU01HE,
HS7766KCU01HJ,
HS7766KCU01HE,
HS0005TM01HJ, and
HS0005TM01HE
(provided on a CD-R)
Note: Additional document for the MPUs supported by the emulator is included. Check the target
MPU and refer to its additional document.