User`s manual

SuperH™ Family E10A-USB Emulator Section 2 Software Specifications when Using the SH7766
R20UT2190EJ0100 Rev.1.00 Page 22 of 34
Aug 09, 2012
To set the memory-output trace acquisition mode, click the [Trace] window with the right mouse
button and select [Setting] from the pop-up menu to display the [Acquisition] dialog box. The
AUD trace acquisition mode can be set in the [Trace mode1] or [Trace mode2] group box in the
[Trace mode] page of the [Acquisition] dialog box.
Figure 2.6 [Trace Mode] Page
Notes: 1. The memory range for which trace is output is the address on the system bus and not
supported for the MMU or cache.
2. In the memory range for output, do not specify the ranges that the user program has
been downloaded or the user program accesses.
3. Do not specify the internal RAM area for the output range.
4. The range for trace output must be 1 MB or less.