User`s manual

SuperH™ Family E10A-USB Emulator Section 2 Software Specifications when Using the SH7766
R20UT2190EJ0100 Rev.1.00 Page 17 of 34
Aug 09, 2012
2.2.2 Trace Functions
The emulator supports the trace functions listed in table 2.6.
Table 2.6 Trace Functions
Function Internal Trace Memory Output Trace
Branch trace Supported (eight branches) Supported
Range memory access trace Supported (eight events) Supported
Software trace Supported (eight events) Supported
Branch Trace Functions: The branch source and destination addresses, their source lines, branch
types, and types of accessed bus masters are displayed.
[Setting Method]
Select the check box in the [Branch] group box in the [Branch trace] page of the [Branch trace]
dialog box that opens by double-clicking on the Ch12 (Branch) column of the [Eventpoint]
window. The branch condition to be acquired can be set.
Figure 2.3 [Branch trace] Dialog Box
A branch trace can be acquired by selecting the [Acquire trace] check box of the [Action] page.
Note: To cancel settings, select [Delete] from the popup menu that is opened by clicking on the
Ch12 (Branch) column with the right-mouse button.