User`s manual

SuperH™ Family E10A-USB Emulator Section 2 Software Specifications when Using the SH7766
R20UT2190EJ0100 Rev.1.00 Page 14 of 34
Aug 09, 2012
Sequential Setting: In the emulator, sequential setting of an Event Condition is enabled.
Table 2.5 Sequential Event Conditions
Type Event Condition Description
[CPU
Sequential
Event] Page
2 Channel
Sequential
Ch2 -> 1 Halts a program when a condition is satisfied in the
order of Event Condition 2, 1.
An event condition must be set for Ch2 and Ch1.
Ch4 -> 3 Halts a program when a condition is satisfied in the
order of Event Condition 4, 3.
An event condition must be set for Ch4 and Ch3.
Ch6 -> 5 Halts a program when a condition is satisfied in the
order of Event Condition 6, 5.
An event condition must be set for Ch6 and Ch5.
Ch11 -> 10 Halts a program when a condition is satisfied in the
order of Event Condition 11, 10.
An event condition must be set for Ch11 and Ch10.
Many
Channel
Sequential
Ch3 -> 2 -> 1 Halts a program when a condition is satisfied in the
order of Event Condition 3, 2, 1.
An event condition must be set for Ch3, Ch2, and
Ch1.
Ch4 -> 3-> 2 -> 1 Halts a program when a condition is satisfied in the
order of Event Condition 4, 3, 2, 1.
An event condition must be set for Ch4, Ch3, Ch2,
and Ch1.
Ch5 -> 4 -> 3-> 2 -> 1 Halts a program when a condition is satisfied in the
order of Event Condition 5, 4, 3, 2, 1.
An event condition must be set for Ch5, Ch4, Ch3,
Ch2, and Ch1.
Ch6 -> 5 -> 4 -> 3-> 2
-> 1
Halts a program when a condition is satisfied in the
order of Event Condition 6, 5, 4, 3, 2, 1.
An event condition must be set for Ch6, Ch5, Ch4,
Ch3, Ch2, and Ch1.
Ch10 -> 6 -> 5 -> 4 ->
3-> 2 -> 1
Halts a program when a condition is satisfied in the
order of Event Condition 10, 6, 5, 4, 3, 2, 1.
An event condition must be set for Ch10, Ch6,
Ch5, Ch4, Ch3, Ch2, and Ch1.
Ch11 -> 10 -> 6 -> 5 ->
4 -> 3-> 2 -> 1
Halts a program when a condition is satisfied in the
order of Event Condition 11, 10, 6, 5, 4, 3, 2, 1.
An event condition must be set for Ch11, Ch10,
Ch6, Ch5, Ch4, Ch3, Ch2, and Ch1.
CPU Extend Expands the [CPU Sequential Extend] page.
The sequential setting is enabled with any
combination.
For details, refer to section 2.2.1, Sequential Break
Extension Setting, in this manual.
SystemBus
Sequential
Event
Ch9 -> 8 Halts a program when a condition is satisfied for
Event Condition 9, 8.
An event condition must be set for Ch9 and Ch8.
[SystemBus
Sequential
Event] Page
Ch8 -> 9 Halts a program when a condition is satisfied for
Event Condition 8, 9.
An event condition must be set for Ch8 and Ch9.
SystemBus
Extend
Expands the [SystemBus Sequential Extend] page.
The sequential setting is enabled with any
combination.
For details, refer to section 2.2.1, Sequential Break
Extension Setting, in this manual.