User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 77 of 296
Aug 10, 2012
5.1.5 [Memory update] Options
Figure 5.2 [Memory update] option
When this option is checked all High-performance Embedded Workshop views which display
memory data (e.g. the memory view, the watch view etc.) in all Debuggers will update whenever the
memory is changed in any synchronized Debugger.
*
If the option is not set then only the memory views in local Debugger will update when memory is
changed. If memory is shared between Debuggers, a manual refresh will need to be performed in the
memory related windows of the other Debuggers in order for them to display the correct memory.
Note: If the user program is being executed, reading of memory will lead to a short break.
5.1.6 [Synchronization debugging mode] Drop-Down List Box
In the [Synchronization debugging mode] drop-down list box, set the status for the High-
performance Embedded Workshop to be used on the synchronization debugging.
Internal The specified debuggers will be opened in one instance of the
High-performance Embedded Workshop.
This mode is only available if all of the debugger sessions are
in the same High-performance Embedded Workshop
workspace.
Parallel The debugger sessions will be opened in separate instances of
the High-performance Embedded Workshop.