User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 5 Debugging
R20UT0363EJ0500 Rev. 5.00 Page 76 of 296
Aug 10, 2012
5.1.4 [Synchronization options] Group Box
In the [Synchronization style] group box, select the operations for synchronization.
The available items are as listed below.
[Reset] Operations in response to the [Reset CPU] and [Reset Go]
functions are synchronized. For synchronization of the
response to the [Reset Go] function, the [Go] check box must
also should be checked.
[Go] Operations in response to the [Go] and [Reset Go] functions
are synchronized. For synchronization of the response to the
[Reset Go] function, the [Reset] check box must also should be
checked.
[Break/Halt] Operations in response to a device break and selection of the
[Halt Program] function are synchronized. Selection of
synchronized or non-synchronized operation in response to
individual types of break is not possible.
[Step] Operations in response to the various functions for step
execution are synchronized. When synchronized stepping is
being performed while the other core is executing the user
program, operation of the other core at the end of step
execution depends on the setting for [Break/Halt].
[Connect] Operation of the emulator in response to [Connect] is
synchronized in all sessions.
[Download Modules] Operation of the emulator in response to [Download Modules] is
synchronized in all sessions.
[Initialize] Operation of the emulator in response to [Initialize] is
synchronized in all sessions.
Note: The functions that can be set in this dialog box vary according to the emulator in use. For
details, refer to section 2.2.1, Synchronized Debugging Functions in the additional
document, Supplementary Information on Using the SHxxxx.