User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 4 Preparations for Debugging
R20UT0363EJ0500 Rev. 5.00 Page 72 of 296
Aug 10, 2012
4.7 Ending a Session with the Emulator
When using the toolchain, the emulator can be exited by using the following two methods:
 Canceling the connection of the emulator being activated
 Exiting the High-performance Embedded Workshop
(1) Canceling the connection of the emulator being activated
Select [Disconnect] from the [Debug] menu or click the [Disconnect] toolbar button (
).
Note: Do not select the [Disconnect] toolbar button during user program execution or while a
dialog box is being displayed for a CPU.
(2) Exiting the High-performance Embedded Workshop
Select [Exit] from the [File] menu.
A message box is displayed. If necessary, click the [Yes] button to save a session. After
saving a session, the High-performance Embedded Workshop exits. If not necessary, click the
[No] button to exit the High-performance Embedded Workshop.
Figure 4.25 [Session has been modified] Message Box