User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 4 Preparations for Debugging
R20UT0363EJ0500 Rev. 5.00 Page 66 of 296
Aug 10, 2012
 From the dialog box
1. Select [Debug -> Debug Sessions…]. This will open the [Debug Sessions] dialog box
(figure 4.17).
Figure 4.20 [Debug Sessions] Dialog Box
2. Select the session you want to use from the [Current session] drop-down list box.
3. Click the [OK] button to set the session.
4.4.2 Adding and Removing Sessions
A new session can be added by copying settings from another session or removing a session.
 To add a new empty session
1. Select [Debug -> Debug Sessions…] to display the [Debug Sessions] dialog box (figure
4.17).
2. Click the [Add…] button to display the [Add new session] dialog box (figure 4.21).
3. Check the [Add new session] radio button.
4. Enter a name for the session.
5. Click the [OK] button to close the [Debug Sessions] dialog box.
6. This creates a file with the name entered in step 4. If a file with this name already exists,
an error is displayed.