User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 4 Preparations for Debugging
R20UT0363EJ0500 Rev. 5.00 Page 51 of 296
Aug 10, 2012
4. Set the configuration file name. The configuration file saves the state of High-performance
Embedded Workshop except for the emulator.
Select the CPU core numbers for debugging from the [Core] drop-down list box.
Figure 4.5 [Setting the Debugger Options] Dialog Box
This is the end of the emulator setting.
Click the [Finish] button to exit the Project Generator. The High-performance Embedded
Workshop is activated.
5. After the High-performance Embedded Workshop has been activated, the emulator is
automatically connected. For operation during connection, refer to section 3.9, System Check.