User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 3 Preparation before Use
R20UT0363EJ0500 Rev. 5.00 Page 45 of 296
Aug 10, 2012
Figure 3.29 [INVALID ASERAM FIRMWARE!] Dialog Box
Figure 3.30 [Error JTAG boot] Dialog Box
(d) The following dialog box is displayed when the MCU cannot communicate with the
emulator. The MCU may not operate correctly; check the MCU settings.
Figure 3.31 [Boot Failed!] Dialog Box