User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 3 Preparation before Use
R20UT0363EJ0500 Rev. 5.00 Page 44 of 296
Aug 10, 2012
Figure 3.26 [Can not find /RESET signal] Dialog Box
(b) If the following dialog box is displayed, check that the H-UDI port connector on the
user system is correctly connected.
Figure 3.27 [Check the connection] Dialog Box
(c) If the following dialog box is displayed, the device may not correctly operate. Check
if there are reasons for illegal device operation.
Figure 3.28 [COMMUNICATION TIMEOUT ERROR] Dialog Box