User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 3 Preparation before Use
R20UT0363EJ0500 Rev. 5.00 Page 41 of 296
Aug 10, 2012
8. The [Connecting] dialog box is displayed and connection of the emulator starts.
Figure 3.19 [Connecting] Dialog Box
9. The dialog box shown in figure 3.21 is displayed if no product groups have been installed in
the emulator at the time of purchase or the emulator firmware has been set up for a different
device group. The dialog box shown in figure 3.22 is displayed if an old version of the
emulator firmware has been set up in the emulator. Clicking the [OK] button sets up the
emulator firmware.
Figure 3.20 Dialog Box to Confirm Setting up of the Emulator Firmware