User`s manual

SuperH Family E10A-USB Emulator for Multi-core Microcomputers Section 3 Preparation before Use
R20UT0363EJ0500 Rev. 5.00 Page 22 of 296
Aug 10, 2012
3.2 Emulator Hardware Configuration
As shown in figure 3.2, the emulator consists of an emulator, a USB cable, and a user system
interface cable. The emulator is connected to the host computer via USB 1.1, and also to the USB
port conforming to USB 2.0.
User interface cable
USB cable
E10A-USB emulator
Figure 3.2 Emulator Hardware Configuration (when the 38-pin Type Cable is Used)